How to install self-aligning bearings

release time：2018/8/30 12:26:13

For self-aligning bearings, the intermediate mounting ring prevents the outer ring from tilting and rotating when the shafted bearing is inserted into the housing shaft hole. Some sizes of self-aligning ball bearings protrude from the side of the bearing, so the

intermediate mounting ring should be recessed to prevent damage to the ball.

For detachable bearings, the inner and outer rings can be installed separately. Care must be taken to check that the inner and outer rings are properly centered to avoid scratching the bearing raceways and rolling parts. A mounting sleeve is

recommended. The outer diameter of the sleeve shall be equal to the inner ring raceway diameter F and the tolerance for machining shall be d10 .

This article is from PSYZC official website, for more info please contact www.psyzc.com