What are the common bearing types

release time：2019/7/3 17:01:53

Angular contact ball bearings have a high limit speed and can withstand both radial and axial loads. They can also withstand pure axial loads.The axial load capacity is determined by the contact angle and increases with the contact angle.  

Single row angular contact ball bearings can only bear axial loads in one direction. When subjected to radial loads, they will cause additional axial forces and must be applied to the

corresponding reverse loads. Therefore, these bearings are generally used in pairs. 

Double row angular contact ball bearings can withstand large radial and axial bidirectional combined loads and moment loads, mainly radial loads, which can limit the axial displacement of

the shaft or casing. The contact angle is 30 degree. 

Paired mounted angular contact ball bearings can withstand radial and axial bidirectional combined loads with radial loads and can withstand pure radial loads. 

The series configuration can only withstand axial loads in one direction, while the other two configurations can withstand axial loads in either direction. 

This type of bearing is generally selected by the manufacturer and assembled into a pair of users. After installation, there is preloading and interference,

and the ferrule and the steel ball are in an axial preload state, thus improving the whole set of bearings as a single support stiffness and rotation. 
         

This article from QIBR official website, reproduced, please indicate the source!QIBR Precision Bearing Manufacturer