SYSTEM OF MEASUREMENT
-
- PA-C Type (Single-Split Type)
-
- PA Type (Separable Outer Ring Type for Inner Ring Rotation)
-
- USP-Grade Series of Models PB and PE
-
- PE Type (Two-piece Inner Ring Type for Outer Ring Rotation)
-
- PB Type (Separable Outer Ring Type for Inner Ring Rotation)
-
- PU Type(Integrated Inner/Outer Ring Type)
-
- PAU Type(Integrated Inner/Outer Ring Type)
Internal Diameter (d),mm
Outer Diameter (D),mm
Width (B),mm
PU Type(Integrated Inner/Outer Ring Type)
Standards：GOST/ASMT/GB
Seal Type：Open bearing
Bearing Type：Cross Roller Bearing
Material： 100Cr6/Bearing steel
Inner Diameter： 10mm-350mm
Outer Dimeter： 52mm-540mm
Lubrication：Required
ABEC Rating: ABEC-5, ABEC-7,ABEC-9
Mounting hole: On the outer and inner ring
Installation requirement: No fixed flange and support seat are required
Application: Suitable for occasions where the outer ring and inner ring rotate
info@psyzc.com
+86 (0379) -63963377
- model selection
| PSY | Main dimensions mm | Basic load rating (radial) | Mass | THK | IKO | ||||
|---|---|---|---|---|---|---|---|---|---|
| Part No. | Inner diameter | Outer diameter | Roller pitch circle diameter | Width | C/KN | C0/kN | kg | Part No. | Part No. |
| PU42 | 20 | 70 | 41.5 | 12 | 7.05 | 8.15 | 0.27 | RU42 | CRBF2012AT |
| PU66 | 35 | 95 | 66 | 15 | 17.1 | 22.1 | 0.6 | RU66 | CRBF3515AT |
| PU85 | 55 | 120 | 85 | 15 | 20.1 | 29 | 0.9 | RU85 | CRBF5515AT |
| PU124(G) PU124X | 80 | 165 | 124 | 22 | 33 | 50 | 2.5 | RU124(G) RU124X | CRBF8022AD CRBF8022AT |
| PU148(G)PU148X | 90 | 210 | 147.5 | 25 | 49 | 76 | 4.8 | RU148(G)RU148X | |
| PU178(G)PU178X | 115 | 240 | 178 | 28 | 80 | 134 | 6.7 | RU178(G)RU178X | |
| PU228(G)PU228X | 160 | 295 | 227.5 | 35 | 103 | 170 | 11.4 | RU228(G)RU228X | |
| PU297(G)PU297X | 210 | 380 | 297.3 | 40 | 153 | 280 | 21.0 | RU297(G)RU297X | |
| PU445(G)PU445X | 350 | 540 | 445.4 | 45 | 470 | 220 | 35.0 | RU445(G)RU445X | |
- Application
Industrial Robert
Industrial RobertThe development of modern industrial robots tends to be lightweight, but at the same time, robots must have the performance of high load, high rotation accuracy, hi… More Info